Fiber Identifier FI-10/11

Optical identifier intended for detection of signals in optical fibers.

FI-10/11 has a working range of 800-1700nm and is capable of detecting 270Hz, 1kHz and 2kHz modulated signals.

Robust, battery operated and simple to use.

Optionally, the instrument can measure optical signal power and perform identification of direction of the signal in optical fibers.

Visible Fault Locator OVF-1

Visible Fault Locator is used to identify optical fibers.

OVF-1 works at 650 nm and has the power of -5dBm that gives it a range of over 5 km.

The instrument can work in continuous (CW) and 2-3Hz blinking regime.

Battery powered, small sized and robust.

Universal push-pull interface (UPP) for all kinds of 2.5mm connectors (FC, SC, ST) and the adaptor for 1,25 connectors (LC, MU or F3000).

Optical Inspection Microscope OIM-400

Optical microscope for examination of connector surfaces and detection of possible scratches or dirt.

The microscope has a white LED diode for coaxial illumination with a lifetime expectancy of 100.000 hours, with a protective filter and magnification of 400x.

OIM-400 is battery powered, small-sized and simple to use.

Optical Cleaning Kit OCK-10

Optical cleaning kit for optical connector cleaning. Includes paper, tape and cleaning sticks with a carrying case.